Blog

There is no single month that is always best for replacing a roof in Amarillo. The right time is when the roof needs the work and we have a safe, dry weather window that satisfies the installation requirements for the selected shingles, metal panels, membrane, adhesives, sealants, and underlayment. For many projects, spring and fall […]

As a practical planning range, an Amarillo asphalt-shingle roof may serve roughly 15–30 years, a commercial TPO roof about 20–30 years, and a properly designed metal roof about 30–60 years or longer. Those are not guarantees or replacement deadlines. Actual service life depends on the exact product, roof assembly, installation, hail and wind exposure, drainage, […]

A hot Amarillo attic does not automatically mean your home needs more roof vents. In a properly designed vented attic, low intake vents and high exhaust vents must work together, but ventilation is only one part of the system. Air sealing, insulation, clear soffit pathways, duct condition, roof geometry, and the location of exhaust openings […]

If your roof starts leaking during an Amarillo storm, protect people first, stay off the roof, move away from wet electrical fixtures or a sagging ceiling, and contain water only from a safe floor-level location. Once the weather clears, a professional inspection should trace the entry point, evaluate the roof assembly, and determine whether the […]

Water on a flat roof becomes a roofing problem when it does not drain as the roof was designed and documented to drain, repeatedly collects in the same area, deepens or expands, blocks access to drainage, accompanies membrane or interior distress, or indicates structural deflection. Water visible during a downpour or shortly after rain is […]

Commercial roof edges and corners often fail first because wind accelerates and changes direction around a building’s boundaries, producing stronger uplift pressures than it produces across much of the roof field. Those zones also contain membrane terminations, edge metal, coping, fasteners, seams, and transitions. If one part loses resistance, wind can enter beneath the roof […]

A hail-damaged commercial roof should be repaired, coated, recovered, or replaced according to what the storm changed throughout the roof assembly—not according to hail size, dent count, or roof age alone. Localized, repairable damage on an otherwise dry and stable system may justify repairs. A coating may be appropriate when the existing roof is compatible, […]

Short answer: TPO is often the better fit for a broad low-slope roof that needs a continuous waterproof membrane around HVAC units, drains, curbs, and other penetrations. Metal often fits sloped commercial buildings, open-purlin structures, warehouses, shops, and visible roofs where a properly engineered panel system matches the geometry. A low-slope metal roof can also […]

Short answer: Metal roof screws usually back out because the roof panel and its connections have been repeatedly stressed by thermal movement, wind cycling, installation errors, deteriorated washers, corrosion, or a weakened attachment point. In Amarillo, rapid temperature changes and persistent wind make those details especially important. Replacing or resetting a few fasteners can be […]

Water under an Amarillo metal roof may be condensation, an active roof leak, or both. Condensation forms when moist air contacts metal, decking, or another surface below the air’s dew point. A leak introduces rainwater through an opening. Metal does not create moisture, and dripping alone cannot identify the source. Timing and distribution provide clues. […]